- Posts: 42
- Thank you received: 12
Head gasket
- gocommando
-
Topic Author
- Offline
- Senior Member
-
Less
More
10 years 1 month ago #532
by gocommando
Head gasket was created by gocommando
Previous owner of my 75 commando installed new copper head gasket and it weeps. Sometime next month I plan on replacing with composite gasket. So any specific brand or supplier I should use? Should I use any "goop" in any locations? Any tips or suggestions would be appreciated. Even with the weeping I put over 2500 miles (and counting) it's just kind of annoying and I think my jeans need an oil change. Ok let me have it...thanks
Please Log in to join the conversation.
- commando6868
-
- Offline
- Premium Member
-
Less
More
- Posts: 113
- Thank you received: 45
10 years 1 month ago #533
by commando6868
"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Replied by commando6868 on topic Head gasket
If you can make it to Dave's text session today, Saturday the 15th, that would be the best way to get advice on the head gasket. I would bet Dave would have the correct gasket so you can see exactly what you need to install it. You'll also get some tips on how to set everything up correctly. It's also going to be a good day for a full ride.
"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Please Log in to join the conversation.
- gocommando
-
Topic Author
- Offline
- Senior Member
-
Less
More
- Posts: 42
- Thank you received: 12
10 years 4 weeks ago #536
by gocommando
Replied by gocommando on topic Head gasket
thanks will try to make tech session-my Saturdays are booked for awhile
Please Log in to join the conversation.
9 years 10 months ago #623
by ssbn610g
Replied by ssbn610g on topic Head gasket
I put a flame ring head gasket on my 75 in 1998 and have had no issues. That being said, I have heard some comments from Norton aficionado's who had issues. I would ask Dave for his thoughts.
Alpo
Alpo
Please Log in to join the conversation.
9 years 10 months ago #624
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
Replied by dynodave on topic Head gasket
Hi Alpo
Come see the group some time...
One thing about flame rings is they are not consistant. years ago I loved them since they were uncoated and I could do head swap-outs several times with one gasket. Then they came out with coated flame rings that had some type of shiney thermoset glue on them. Once heated that was final. You have to break them off and scrape the surfaces to prep for another try. I HATE them.
Now I keep an eye out for NOS old style.
I always had used permatex 518 gasket eliminator around the push rod tunnel and drain back hole.
Come see the group some time...
One thing about flame rings is they are not consistant. years ago I loved them since they were uncoated and I could do head swap-outs several times with one gasket. Then they came out with coated flame rings that had some type of shiney thermoset glue on them. Once heated that was final. You have to break them off and scrape the surfaces to prep for another try. I HATE them.
Now I keep an eye out for NOS old style.
I always had used permatex 518 gasket eliminator around the push rod tunnel and drain back hole.
Dave Comeau
atlanticgreen.com/contact.htm
Please Log in to join the conversation.
- gocommando
-
Topic Author
- Offline
- Senior Member
-
Less
More
- Posts: 42
- Thank you received: 12
9 years 10 months ago #625
by gocommando
Replied by gocommando on topic Head gasket
Thanks for the advice Alpo. So Dave what gasket that is currently available would you recommend? Anyone else ? Thanks.
Please Log in to join the conversation.
Time to create page: 0.048 seconds
Copyright © 2026 NNENO.org - Produced by Media Guys dot com