FIBERGLASS TANKS
11 years 2 months ago #238
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
FIBERGLASS TANKS was created by dynodave
The chronic problem of E-10 in old general purpose resin tanks is finally looking like it may be resolved for me...hopefully....As some in the club know, I've quit doing fiberglass work for this reason. Especially Dunstall repops and fastback & interstate repops.
I finally made contacts in the chemical industry and hope to get some resin that is finally E-10 proof that I can make my tanks with. It will probably require making an oven to bake the components but that will not stop me.
I may finally be able to reassemble my 68 Dunstall atlas...
I finally made contacts in the chemical industry and hope to get some resin that is finally E-10 proof that I can make my tanks with. It will probably require making an oven to bake the components but that will not stop me.
I may finally be able to reassemble my 68 Dunstall atlas...
Dave Comeau
atlanticgreen.com/contact.htm
The following user(s) said Thank You: don moreton, jim winning
Please Log in to join the conversation.
- rightshiftrick
-
- Offline
- Premium Member
-
Less
More
- Posts: 139
- Thank you received: 18
11 years 1 month ago #272
by rightshiftrick
Replied by rightshiftrick on topic FIBERGLASS TANKS
That is good news. I would still love to run a Fastback tank, but will not use my original due to the ethanol. It's the reason I picked up a steel Interstate tank, and am going to run it.
Please Log in to join the conversation.
- billcblk73
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
11 years 1 month ago #274
by billcblk73
Replied by billcblk73 on topic FIBERGLASS TANKS
Hi I have a 73 with a fiberglass tank and side covers . It also has early tail light. Tank had a leak at seam on bottom and was soft. bought an e-bay tank in nice shape and used Caswel sealer. I think this year should have a steel tank ? and side covers ? but I like the look of the glass tank. Am I going the wrong way with Caswel sealer ? Have not finished tank paint or used it yet.Are any of the steel tanks (roadster ) worth the trouble ?
Please Log in to join the conversation.
11 years 1 month ago #275
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
Replied by dynodave on topic FIBERGLASS TANKS
For the most part all 73 had steel tanks. The caswell lining may be the most popular and successful for coating polyester resin tanks. However that is exactly what I am trying to get away from by making a new tank using the right stuff.
Dave Comeau
atlanticgreen.com/contact.htm
Please Log in to join the conversation.
- Commando74
-
- Offline
- User is blocked
-
Less
More
- Posts: 9
- Thank you received: 1
10 years 11 months ago #326
by Commando74
Replied by Commando74 on topic FIBERGLASS TANKS
Regarding Caswell, I used it on the fiberglass tank on my 72. It worked very well for over 10 years, then two summers ago it gunked up fairly suddenly, which I noticed when the carb slides stopped sliding (along with the piston rings). This all led to a complete rebuild but that's another topic. What I did do was purchase one of the new India made steel tanks. Pretty good replica, but uses the steel type rear mounting strap rather then the rubber "O Ring" attachment. So it's not 100% original, but I'm ok with it. Note of caution - if you get one of the India made tanks expect to have to clean out some internal surface rust and do some surface prep/filling prior to painting. And the gas cap flange may need some adjustment as the hinge pin holes on mine were just a bit off - nothing that a larger drill and a brass sleeve couldn't fix. On the gas cap subject, the hinged pot metal locking piece as I'm sure every Norton owner knows tends to be fragile as the hinge pin is right at the weakest place. I made a few new ones out of steel and had them chromed. They look great and will never break, but a lot of work to fabricate using mostly hand tools. Anyway, that's my experience with Caswell. Had I drained the tank each winter it would probably still be ok, but I didn't so here I am. Upon disassembly the engine would have needed a rebuild in a year or two anyway, so this just accelerated my timetable a bit.
The following user(s) said Thank You: dynodave
Please Log in to join the conversation.
- commando6868
-
- Offline
- Premium Member
-
Less
More
- Posts: 113
- Thank you received: 45
10 years 10 months ago #352
by commando6868
"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Replied by commando6868 on topic FIBERGLASS TANKS
I just saw an ad for Nylon gas tanks in Cafe' Racer magazine, they were for rice rocket frames. No mention of replacements for Nortons. company is out of Australia: Twig TT is the companies name.
WWW.trx850caferacer.com
Has anyone heard of using nylon fuel tanks? They claim that they are made to accept ethanol gas.
Speaking of cafe' racers, I was at Bob Colemans house last week and he has a Honda 500/4 for sale. Extra motor. 2 tanks and other bits.
Also in the mag was a nice write up, with photos, of the Norton Carolina rally. The author wrote about John Flavill, The Norton Commando engineer who led the design team on the Harley Evolution motor that saved the Motor Company from extinction. He was manager of engine design. The motor had rubber mounts and a diaphragm clutch, sound familiar?
Has anyone heard of using nylon fuel tanks? They claim that they are made to accept ethanol gas.
Speaking of cafe' racers, I was at Bob Colemans house last week and he has a Honda 500/4 for sale. Extra motor. 2 tanks and other bits.
Also in the mag was a nice write up, with photos, of the Norton Carolina rally. The author wrote about John Flavill, The Norton Commando engineer who led the design team on the Harley Evolution motor that saved the Motor Company from extinction. He was manager of engine design. The motor had rubber mounts and a diaphragm clutch, sound familiar?
"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Please Log in to join the conversation.
Time to create page: 0.045 seconds
Copyright © 2026 NNENO.org - Produced by Media Guys dot com