- Thank you received: 0
Lowering Kit 71 Norton Commando
- mrgq4126
- Topic Author
- New Member
-
Less
More
10 years 3 months ago #489
by mrgq4126
Lowering Kit 71 Norton Commando was created by mrgq4126
I am still new to this Bike thing. Can anyone tell me how to lower a Norton to fit my 25" inseem legs? Is there a lowing kit out there? Any guess on how much it would cost me to get this bike low enough to put both feet on the ground? Just sold my daily rider and hope that I can get this bike in shape to ride without breaking the bank. Please keep in mind that I am not a mechanic, and the easier the better.
Please Log in to join the conversation.
10 years 3 months ago - 10 years 3 months ago #492
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
Replied by dynodave on topic Lowering Kit 71 Norton Commando
Commando's are a tall bike. Lowering them are not easy or normally very successful. Shorter rear shocks including shorter & stiffer springs, 18" wheels, and featherbed components in the front end, shaving down the seat are the normal areas approached. IMO the bikes basic characteristics are very compromised.
However since I have always felt the commando is a TOURING bike and NOT a hot rod or cafe racer, as such, the usefulness as a touring bike remains unchanged.
As a non-mechanic this would cost you at least several thousand dollars
However since I have always felt the commando is a TOURING bike and NOT a hot rod or cafe racer, as such, the usefulness as a touring bike remains unchanged.
As a non-mechanic this would cost you at least several thousand dollars
Dave Comeau
atlanticgreen.com/contact.htm
Last edit: 10 years 3 months ago by dynodave.
Please Log in to join the conversation.
- mrgq4126
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 3 months ago #493
by mrgq4126
Replied by mrgq4126 on topic Lowering Kit 71 Norton Commando
Dave, Yesterday I took the bike off the center stand to sit on it. I am using my tippy toes with original seat. So I also tried taking the seat off and sat on the frame. I was able to place both feet flat when sitting on the frame. The shocks that are on the bike now are not originals but beefed because the previous owner had a rider. I do have the originals to try. If the original shocks are lower, and I can find a nice cafe style seat, I think it may work. Will keep all original equipment for value, but to ride will need some non OEM equipment.
Please Log in to join the conversation.
- mikethgreek
-
- Offline
- Junior Member
-
Less
More
- Posts: 33
- Thank you received: 7
10 years 2 months ago #509
by mikethgreek
Replied by mikethgreek on topic Lowering Kit 71 Norton Commando
Shane, you might try my approach, get some Frye harness boots and if necessary, have the local cobbler fashion a slightly higher heel for them. IThe existing heel is about an inch and a half or so, this helped me out riding by BMW (didn't have to modify the heels, the ones on the boots were just right).Less than $200.
Please Log in to join the conversation.
- commando6868
-
- Offline
- Premium Member
-
Less
More
- Posts: 113
- Thank you received: 45
10 years 2 months ago #523
by commando6868
"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Replied by commando6868 on topic Lowering Kit 71 Norton Commando
As an added benefit, Mike seems taller now! Seriously, I too have a pair of boots with extra soles and heels for a tall "adventure " bike I have, it does help.
MF
MF
"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Please Log in to join the conversation.
Time to create page: 0.042 seconds
Copyright © 2026 NNENO.org - Produced by Media Guys dot com