TOPIC: Head gasket

Head gasket 15 Oct 2016 07:32 #2

commando6868
Offline
Premium Member
Posts: 113
Thank you received: 46

If you can make it to Dave's text session today, Saturday the 15th, that would be the best way to get advice on the head gasket. I would bet Dave would have the correct gasket so you can see exactly what you need to install it. You'll also get some tips on how to set everything up correctly. It's also going to be a good day for a full ride.

Please Log in to join the conversation.

"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"

Head gasket 17 Oct 2016 07:24 #3

gocommando Topic Author Offline Senior Member Posts: 42 Thank you received: 12	thanks will try to make tech session-my Saturdays are booked for awhile Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation.

Head gasket 12 Jan 2017 15:27 #4

ssbn610g Offline New Member Posts: 5 Thank you received: 1	I put a flame ring head gasket on my 75 in 1998 and have had no issues. That being said, I have heard some comments from Norton aficionado's who had issues. I would ask Dave for his thoughts. Alpo Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation.

Head gasket 12 Jan 2017 16:12 #5

dynodave
Offline
Moderator
dynodave
Posts: 450
Thank you received: 263

Hi Alpo
Come see the group some time...
One thing about flame rings is they are not consistant. years ago I loved them since they were uncoated and I could do head swap-outs several times with one gasket. Then they came out with coated flame rings that had some type of shiney thermoset glue on them. Once heated that was final. You have to break them off and scrape the surfaces to prep for another try. I HATE them.

Now I keep an eye out for NOS old style.
I always had used permatex 518 gasket eliminator around the push rod tunnel and drain back hole.

Please Log in to join the conversation.

Dave Comeau
atlanticgreen.com/contact.htm

Head gasket 12 Jan 2017 19:39 #6

gocommando Topic Author Offline Senior Member Posts: 42 Thank you received: 12	Thanks for the advice Alpo. So Dave what gasket that is currently available would you recommend? Anyone else ? Thanks. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation.

Head gasket 13 Jan 2017 01:31 #7

ssbn610g Offline New Member Posts: 5 Thank you received: 1	OT: Dave, I intend to get to a meeting this year as it has been a long time. I also talked with Mike F. about going to the Nationals this year. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation.

Page:
1
2

Forum

NNENO Tech Forum

NHT supporting systems & components

Head gasket

Time to create page: 0.023 seconds