- Posts: 22
- Thank you received: 7
Exhaust gasket ?
- rod rayborn
-
Topic Author
- Offline
- Junior Member
-
Less
More
11 years 6 months ago #79
by rod rayborn
Exhaust gasket ? was created by rod rayborn
I am replacing my exhaust system on my MKIII 850. The headers are 1-3/8" but flare out at the head where the exhaust nut is snug around the pipe flare....So, do I use the conical gasket--flat side against the header---curved side in the head so that it will seal
if the pipe is off slightly. Or do I need a different type gasket or nut?
Rod
if the pipe is off slightly. Or do I need a different type gasket or nut?
Rod
Please Log in to join the conversation.
11 years 6 months ago - 11 years 6 months ago #81
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
Replied by dynodave on topic Exhaust gasket ?
That flange is a typical flat 750 style. It needs a 750 style donut ring gasket that will become flat on installation. Your 850 exhaust rose will have threads that are to short to allow bottoming out.You will not need any 850 or MKIII hardware
So an early 750 nut will be needed. In 1973, the only year for a 750 thread length rose, that is also of big fin style... like the 850s, could be used for a cosmetically correct.exhaust rose.
BCS had these on sale a while back. I don't think they knew what they were!
So an early 750 nut will be needed. In 1973, the only year for a 750 thread length rose, that is also of big fin style... like the 850s, could be used for a cosmetically correct.exhaust rose.
BCS had these on sale a while back. I don't think they knew what they were!
Dave Comeau
atlanticgreen.com/contact.htm
Last edit: 11 years 6 months ago by dynodave.
Please Log in to join the conversation.
- rod rayborn
-
Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 7
11 years 6 months ago #83
by rod rayborn
Replied by rod rayborn on topic Exhaust gasket ?
Hey Dave,
Do you know the part # for the rose and gasket...I don't have a 73 parts book
Thanks,
Rod
Do you know the part # for the rose and gasket...I don't have a 73 parts book
Thanks,
Rod
Please Log in to join the conversation.
11 years 6 months ago #84
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
Replied by dynodave on topic Exhaust gasket ?
rose 750 NMT10892 or 06-2464
O-ring gasket NMT2166 or 06-3253
rose 73 750 06-3555 O-ring gasket 06-3995
rose 850 06-3988
O-ring gasket NMT2166 or 06-3253
rose 73 750 06-3555 O-ring gasket 06-3995
rose 850 06-3988
Dave Comeau
atlanticgreen.com/contact.htm
The following user(s) said Thank You: KenH
Please Log in to join the conversation.
Time to create page: 0.043 seconds
Copyright © 2026 NNENO.org - Produced by Media Guys dot com