Garage:Tom Peterson/ commando seat alignment
8 years 5 months ago #901
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
Garage:Tom Peterson/ commando seat alignment was created by dynodave
Hi Tom
If you bring your seat (or the whole bike) tonight to thursday nite "gearheads", as offered before, I can show you the considerations that will allow the seat to fit properly.. bent or unbent frame loop, good, bad or incorrect seat pan for your 850 frame, along with the correct seat buffers. will make the seat "fit".
Unfortunately gocomando comments were in the wrong place.
All comments belong in tech talk or club chat section.
If you bring your seat (or the whole bike) tonight to thursday nite "gearheads", as offered before, I can show you the considerations that will allow the seat to fit properly.. bent or unbent frame loop, good, bad or incorrect seat pan for your 850 frame, along with the correct seat buffers. will make the seat "fit".
Unfortunately gocomando comments were in the wrong place.
All comments belong in tech talk or club chat section.
Dave Comeau
atlanticgreen.com/contact.htm
Please Log in to join the conversation.
8 years 4 months ago - 5 years 1 day ago #914
by dynodave
Dave Comeau
atlanticgreen.com/contact.htm
Replied by dynodave on topic Garage:Tom Peterson/ commando seat alignment
It was found the rear frame loop was reworked in the past and it was "short" a few inches. Second, it was not a commando fender which added to the alignment problem. A proper rear loop has been sourced and the seat alignment project continues....
added:
and was finally resolved
added:
and was finally resolved
Dave Comeau
atlanticgreen.com/contact.htm
Last edit: 5 years 1 day ago by dynodave.
Please Log in to join the conversation.
Time to create page: 0.041 seconds
Copyright © 2026 NNENO.org - Produced by Media Guys dot com