Smiths electronic speedometer installation

More
6 years 8 months ago - 6 years 8 months ago #1095 by commando6868
After 5,6 ? speedometer drives, the last one went tits-up 10 miles into the ride to the rally last year, I decided to go with the Smiths electronic. It is made in Wales, all the parts, I am told. The tripmeter and odometer toggle, but you have to wire in your own switch, none on the instrument. ( WTF).:angry:
I mounted the magnetic bolt on the rear disc and the pick-up on the caliper plate, It probably won't be noticed. The instrument mounts in the origional cup, looks great. I will be mounting a toggle switch next. Then I will be wiring everything with 18 gage wire. When that is done I will have to ride with a GPS and calibrate it.

"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Last edit: 6 years 8 months ago by commando6868.
The following user(s) said Thank You: PMellin

Please Log in to join the conversation.

More
6 years 8 months ago - 6 years 8 months ago #1096 by dynodave
what is the additional function of the switch that is not a single 12v ignition power on/off??? 18ga? why so fat?
Last edit: 6 years 8 months ago by dynodave.

Please Log in to join the conversation.

More
6 years 8 months ago #1097 by commando6868
The additional switch is a toggle switch will change the odometer to the trip meter. 18 ga easier for me to work with.



"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"

Please Log in to join the conversation.

More
6 years 8 months ago #1098 by dynodave
OK, I get it a ladder type programing using a single open/close switch.to navigate the programing rungs...

Please Log in to join the conversation.

More
6 years 8 months ago - 6 years 8 months ago #1105 by commando6868
Wiring complete, all connections soldered and sealed. I installed a toggle button on the dash, to change from odometer to trip.Next is good weather (warm), ride it with a GPS to calibrate it. Just to make it more interesting, one of the (9) wires coming out of the speedometer was a different color than any of the ones shown in the instructions.

"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
Last edit: 6 years 8 months ago by commando6868.
The following user(s) said Thank You: GONZO

Please Log in to join the conversation.

More
6 years 8 months ago #1106 by commando6868
Pickup is mounted on the Rear Caliper Mounting Plate, the magnetic nut is on the disc

"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"
The following user(s) said Thank You: DJB, PMellin

Please Log in to join the conversation.

Time to create page: 0.073 seconds