TOPIC: Prestolite-MGD4111 starter

Prestolite-MGD4111 starter 15 Oct 2022 18:17 #1

dynodave
Topic Author
Offline
Moderator
dynodave
Posts: 450
Thank you received: 263

email 2022-10-15
Hello Dave
you come recommended, I have a 75 Commando with a rebuild Starter, however we can't find the seal that goes in the endcap on the primary case end, I have the O ring on the outer but can't fid the seal on the shaft, we can't even find a part number on the parts diagrams! Any ideas suggestions please...
Thank you

A. P.

Please Log in to join the conversation.

Dave Comeau
atlanticgreen.com/contact.htm

Prestolite-MGD4111 starter 16 Oct 2022 17:11 #2

dynodave
Topic Author
Offline
Moderator
dynodave
Posts: 450
Thank you received: 263

Well this is sort of an introduction to the MK3 starter discussion.
Here is the parts book PIX followed by the IPL.

Part1 is a regular dash -233 oring
Part 27 has an unidentified seal 1'OD x 11/16 shaft x 3/16 thickness.
McMaster -Carr
Buna-N Rubber with Steel Case and Spring

11/16" 0.999" 0.204" 3,900 10 -40° to 210° Durometer 75A (Hard) Black Acrylic Coated Green DIN 3760, ISO 6194 PN 5154T14 $11.97
:

Attachments:

Please Log in to join the conversation.

Dave Comeau
atlanticgreen.com/contact.htm

Prestolite-MGD4111 starter UPGRADE "realy"??? 16 Oct 2022 17:30 #3

dynodave Topic Author Offline Moderator dynodave Posts: 450 Thank you received: 263	Critique of the upgrade of the mgd4111 to follow. LOL Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. Dave Comeau atlanticgreen.com/contact.htm

Forum

NNENO Tech Forum

NHT supporting systems & components

Prestolite-MGD4111 starter