TOPIC: Smiths electronic speedometer installation

Smiths electronic speedometer installation 23 Feb 2020 09:02 #2

dynodave Offline Moderator dynodave Posts: 450 Thank you received: 263	what is the additional function of the switch that is not a single 12v ignition power on/off??? 18ga? why so fat? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. Dave Comeau atlanticgreen.com/contact.htm

Smiths electronic speedometer installation 23 Feb 2020 12:17 #3

commando6868 Topic Author Offline Premium Member Posts: 113 Thank you received: 46	The additional switch is a toggle switch will change the odometer to the trip meter. 18 ga easier for me to work with. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. "THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"

Smiths electronic speedometer installation 24 Feb 2020 08:42 #4

dynodave Offline Moderator dynodave Posts: 450 Thank you received: 263	OK, I get it a ladder type programing using a single open/close switch.to navigate the programing rungs... Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. Dave Comeau atlanticgreen.com/contact.htm

Smiths electronic speedometer installation 29 Feb 2020 08:49 #5

commando6868
Topic Author
Offline
Premium Member
Posts: 113
Thank you received: 46

Wiring complete, all connections soldered and sealed. I installed a toggle button on the dash, to change from odometer to trip.Next is good weather (warm), ride it with a GPS to calibrate it. Just to make it more interesting, one of the (9) wires coming out of the speedometer was a different color than any of the ones shown in the instructions.

Attachments:

The following user(s) said Thank You: GONZO

Please Log in to join the conversation.

"THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"

Smiths electronic speedometer installation 29 Feb 2020 09:21 #6

commando6868 Topic Author Offline Premium Member Posts: 113 Thank you received: 46	Pickup is mounted on the Rear Caliper Mounting Plate, the magnetic nut is on the disc Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable. The following user(s) said Thank You: DJB, PMellin
	Please Log in to join the conversation. "THE FUTURE'S UNCERTAIN AND THE END IS ALWAYS NEAR"

Smiths electronic speedometer installation 02 Mar 2020 03:42 #7

dynodave Offline Moderator dynodave Posts: 450 Thank you received: 263	Reed switch is interesting? must be 2 wires!. I would have expected a hall sensor i.e.3 or 4 wire semiconductor device.device. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in to join the conversation. Dave Comeau atlanticgreen.com/contact.htm

Page:
1
2

Forum

NNENO Tech Forum

NHT supporting systems & components

Smiths electronic speedometer installation

Time to create page: 0.452 seconds